Stack lnbs works great
If you are want to connect multiple
Receivers using a high frequency splitter

Stack lnbs are greatest LNBS made. These LNBS are mainly used for Star Choice Satellite systems. What makes these LNBS unique is the splitting capability by using high frequency splitters.

A single cable is connected from this LNB to a High Frequency Splitter. As you can see from the picture above, these splitters are not ordinary ones. They have a frequency range from 900MHZ to 2150 MHZ. There are others with higher frequency range and those will work too. As long as they are within the 2150MHZ range, any high frequency splitter will do the trick. You can find these splitters in a two ways, three ways, four ways combination and more.

Now, there is a good news and a bad news about these LNBS. The good news is obvious. One single line can branch to multiple receivers without any signal loss. Be aware that newer receivers work better than older ones. In older receivers the signal becomes weaker. So be careful combining high frequency splitter in older receiver boxes.

The bad news is: these LNBs won't work for High Definition television. Please remember, this lnb is picking up only Anik-F1 satellite. Anik F1 has all the English channels. Anik-E2 is the second satellite that has all the HDTV channels. If you want to pick both satellites, you need a different LNB.




Click here - to go to satellite lnb page from stack lnbs webpage